Cookie Policy

Ricoh uses data collection tools such as cookies to provide you with a better experience when using this site. You can learn how to change these settings and get more information about cookies here

Ricoh launches 4A PWM step-down DCDC converter for industrial, automotive and consumer applications

Ricoh Europe, Amstelveen, the Netherlands, 17 January, 2017 – Ricoh Europe (Netherlands) B.V. Semiconductor Support Centre has launched the new 4A synchronous buck DC/DC converter RP510 with an input voltage range up to 5.5V and an optional fixed or adjustable output voltage range from 0.8V to 3.3V. The DC/DC converter supports Power Supplies or Point of Load converters for Microprocessors, FPGAs or DSPs.

Point of Load power supplies solve the challenge of high peak current demands and low noise margins, required by high-performance processors, by placing individual power supply regulators close to their point of use.

The device features a range of protection circuits contributing to the safe operation of the application. A Power-Good (PG) output provides a fault signal to the system when the device is not ready for regular operation or when any of the protection circuits or states are active. 

  • An Under Voltage Lock Out (UVLO) function disables the chip below a minimum input voltage level.
  • The Thermal Shutdown function protects the device during an overload condition and disables it when exceeding a temperature threshold.
  • The Output Over Voltage Detection (OVD) and Under Voltage Detection (UVD) indicate a fault signal when the output voltage is 20% above or below the regular setting value. 
  • With the Over Current protection option, the designer can either select from a latched mode or fold-back version, depending on the application requirements. Latched over current protection shuts down the chip after detecting an excessive high load for a specified time and requires a reboot of the power supply to resume to normal operation after removing the excessive load. The fold-back protection circuit is triggered in a similar way but reduces the switching frequency in order to lower the excessive load current, the circuit will be released automatically after removing the excessive load.

The adjustable Soft Start Time provides a smooth output voltage ramp up, by using an external capacitor. The oscillator frequency is internally fixed at 2.3MHz and the RP510 requires a small inductor of 1mH. RP510 is available in a compact 3 x 3mm DFN3030-12 package, convenient to be used on high density boards.

RP510 Features:
Input Voltage Range2.5V to 5.5V
Output Voltage Range0.8V to 3.3V
Output Voltage Accuracy±1% (Vset ≥ 1.2V), ±12mV (Vset < 1.2V)
Feedback Voltage Accuracy±6mV (Vfb = 0.6 V)
Output/Feedback Voltage Temperature Coefficient±100ppm/°C
Standby CurrentTyp.0.35μA (RP510LxxN), Typ.0.01μA or less (RP510LxxG/H/J)
Oscillator FrequencyTyp. 2.3MHz
Built-in Driver On-resistance (Pch./Nch.)Typ.40mΩ (VIN=3.6V)
Maximum Duty CycleMin. 100%
Operating Temperature Range−40°C to 85°C
Protection FeaturesUVLO, LX Peak Current Limit, Latch/Foldback Overcurrent Protection,Thermal Shutdown
Power Good OutputNMOS Open-drain Output
*Above details refer to consumer version, please visit our website for industrial and automotive specifications

|About Ricoh|

Ricoh is empowering digital workplaces using innovative technologies and services enabling individuals to work smarter. For more than 80 years, Ricoh has been driving innovation and is a leading provider of document management solutions, IT services, communications services, commercial and industrial printing, digital cameras, and industrial systems.

Headquartered in Tokyo, Ricoh Group operates in approximately 200 countries and regions. In the financial year ended March 2020, Ricoh Group had worldwide sales of 2,008 billion yen (approx. 18.5 billion USD).

For further information, please visit

For further information, please contact: 
Ricoh Europe PLC
Jack Gibson
Tel: +44 (0) 203 033 3766
Join us on Facebook:
Follow us on Twitter:
Follow us on LinkedIn:
Visit the Ricoh media centre at: